< Previous Next >
2011 - RX-8 - Body and Accessories
REAR BUMPER REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the trunk end trim. (See
3. Remove the trunk side trim. (See
4. Remove the rear combination lights. (See
REMOVAL/INSTALLATION.)
5. Remove the rear splash shield. (See
6. Remove in the order indicated in the table.
1Screw A
2Screw B
3Screw C
TRUNK END TRIM
REMOVAL/INSTALLATION.)
TRUNK SIDE TRIM
REMOVAL/INSTALLATION.)
REAR COMBINATION LIGHT
SPLASH SHIELD
REMOVAL/INSTALLATION.)