Mazda RX-8 Workshop Manual page 3496

< Previous Next >
2011 - RX-8 - Body and Accessories
TRUNK LID REMOVAL/INSTALLATION
WARNING:
Removing the stay damper without supporting the trunk lid can be dangerous. The trunk
lid may fall and injure you. Be sure to open the trunk lid completely and support it securely
before removing the stay damper.
1. Disconnect the negative battery cable.
2. Disconnect the trunk lid wiring harness connector, then take the trunk lid harness out from
the vehicle.
3. Remove the clips that secure the trunk lid wiring harness.
4. Pry off the stay damper band using a flathead screwdriver.