Mazda RX-8 Workshop Manual page 2224

Line pressure Line
control pressure
1E
solenoid control
GND solenoid
1F —
1G CAN_H PCM
1H —
1I —
ATF
1J temperature TFT sensor
(+)
1K —
Shift
Shift
1L solenoid G
solenoid G
GND
TFT sensor
1M TFT sensor Under any condition
GND
Idle and selector lever is at P position or N
position
—
Idle
—
—
ATF temperature 20°C {68°F}
ATF temperature 40°C {104°F}
ATF temperature 60°C {140°F}
—
Inspect using the wave profile.
(See Inspection Using An Oscilloscope
(Reference).)
—
—
—
—
related wiring
harness
Inspect the line
pressure
control solenoid
(See
VALVE
Below 1.0
INSPECTION
[SJ6A-EL])
Inspect the
related wiring
harness
—
Inspect the
— related wiring
harness
—
—
Approx. Inspect the
3.0 TFT sensor
(See
Approx. TRANSMISSION
2.14 FLUID
TEMPERATURE
(TFT) SENSOR
INSPECTION
[SJ6A-EL])
Approx.
1.38 Inspect the
related wiring
harness
—
Inspect the
shift solenoid G
(See
VALVE
INSPECTION
[SJ6A-EL])
Inspect the
related wiring
harness
Inspect the
Continuity related wiring
SOLENOID
—
—
—
—
SOLENOID