Mazda RX-8 Workshop Manual page 2202

If there is any malfunction, inspect the TCM and AT. (See
4. Decelerate the vehicle and verify that 6→5, 5→4, 4→3, 3→2, and 2→1 downshifts are obtained. The shift points must be as
shown in the table below.
If there is any malfunction, inspect the TCM and AT. (See
5. Decelerate the vehicle and verify that engine braking effect is felt in all gears.
If there is any malfunction, inspect the TCM and AT. (See
6. Drive the vehicle and verify that TCC operation is obtained in 5GR and 6GR. The operation points must be as shown in the table
below.
If there is any malfunction, inspect the TCM and AT. (See
7. Drive the vehicle in 6GR and 5GR and verify that kickdown occurs for 6→5 and 5→4 downshifts, and that the shift points are as
shown in the table below.
If there is any malfunction, inspect the TCM and AT. (See
Vehicle speed at shift point table
Range Mode Throttle condition
M NormalClosed throttle position
P Position Test
1. Shift into the P position on a gentle slope. Release the brake, and verify that the vehicle does not roll.
If there is any malfunction, inspect the AT. (See
< Previous Next >
Vehicle speed Turbine speed
Shift
km/h {mph}
M →M
57—63 {36—39} 1,200—1,300
6 5
M →M
37—43 {23—26} 950—1,050
5 4
M
→M
23—29 {15—17} 850—1,000
4 3
M →M
15—21 {10—13} 800—1,050
3 2
M
→M
12—18 {8—11} 900—1,300
2 1
© 2010 Mazda North American Operations, U.S.A.
SYMPTOM TROUBLESHOOTING ITEM TABLE
SYMPTOM TROUBLESHOOTING ITEM TABLE
SYMPTOM TROUBLESHOOTING ITEM TABLE
SYMPTOM TROUBLESHOOTING ITEM TABLE
SYMPTOM TROUBLESHOOTING ITEM TABLE
(rpm)
SYMPTOM TROUBLESHOOTING ITEM TABLE
[SJ6A-EL].)
[SJ6A-EL].)
[SJ6A-EL].)
[SJ6A-EL].)
[SJ6A-EL].)
[SJ6A-EL].)
Back to Top