Interface Mode - SATO 9001226(A) Service Manual

Section 4: Operation and Configuration

4.7 INTERFACE MODE

In this mode, you can set various parameters governing the use of interface cards.
4.7.1 Overview of Interface Mode Configurations
Return to INTERFACE MODE menu
During Offline mode, press FUNCTION button to display the operational icon menu. Press arrow buttons
1.
to select INTERFACE MODE.
When INTERFACE MODE is displayed, press the FEED button to enter Interface mode for adjustment.
2.
Note:
PASSWORD may prompt on the display if SET PASSWORD is set to ON in the Service mode. Please
refer to Section 4.15 Service Mode for details on how to enter password.
Keypad CONNECT is first displayed. Press the FEED button repeatedly will switch to the next setting
3.
options as shown above. To return to the previous setting option, press ONLINE button.
When the desired setting option is displayed, press arrow buttons to select the item or to set the value and
4.
then press FEED button to save the setting.
Page 4-14
FEED
ONLINE button
button
FUNCTION
button
FEED button
FUNCTION
button
FEED
ONLINE
button
button
FUNCTION
button
Select
NO +
FEED
button
ONLINE
button
FUNCTION
button
FEED
ONLINE
button
button
FUNCTION
button
FEED button
Displayed only when entry
of PASSWORD is enabled
Select YES +
Setting contents differ by I/F card
FEED button
installed.
ONLINE
To the setting of LAN2/Wireless LAN2
button
To the setting of IEEE1284
To the setting of USB
To the setting of RS-232C
Displayed only when
communication protocol is
set to STATUS4
* Press , , or button to select
item or set the value accordingly.
The active arrow icons are displayed
on the screen.
FUNCTION button
FEED button
TG3 Series Service Manual