SATO 9001226(A) Service Manual page 14

Section 2: Basic Specifications
MEDIA
(Be sure to use media manufactured or certified by SATO)
Size
Type
Roll Diameter
Core Diameter
Thickness
Wind Direction
RIBBON
(Be sure to use ribbon manufactured or certified by SATO)
Width
Length
Wind Direction
Winding Method
PROCESSING
CPU
Flash ROM
SDRAM
PRINTER LANGUAGE
Standard
Page 2-2
Label
Continuous
Cutter
Tag
Continuous
Cutter
Direct Thermal/ Thermal Transfer
Use roll media specified by SATO.
Maximum outer diameter: 10" (250 mm)
Inner core diameter: 3" (76.4 mm) and 4" (102 mm),
*The supplied boss is required for loading 4" (102 mm) roll core.
Label: 0.006 to 0.01 in. (0.14 to 0.265 mm)
Tag: 0.006 to 0.013 in. (0.157 to 0.33 mm)
*For details on support for RFID tags, please contact your nearest SATO reseller or
technical support center.
Max. 1476.3 ft. (450 m) (Depending on ribbon type)
Coreless roll (Standard), Rolled onto a core (Option)
SATO Barcode Printer Language (SBPL)
Width: 0.9" to 3.1" (22 to 80 mm)
Width including liner: 1.0 to 3.3" (25 to 83 mm)
Pitch: 0.6" to 9.3" (16 to 237 mm)
Pitch including liner: 0.7" to 9.4" (19 to 240 mm)
Width: 0.9" to 3.1" (22 to 80 mm)
Width including liner: 1.0" to 3.3" (25 to 83 mm)
Pitch: 0.9" to 9.3" (22 to 237 mm)
Pitch including liner: 1.0" to 9.4" (25 to 240 mm)
Width: 1.3" to 3.3" (32 to 83 mm)
Pitch: 1.0" to 9.4" (25 to 240 mm)
Width: 1.3" to 3.3" (32 to 83 mm)
Pitch: 1.0" to 9.4" (25 to 240 mm)
* The size may be limited by use conditions.
depending on media type
Face-out/ Face-In
Max. 3.3" (84 mm)
Face-out/ Face-In
32 Bit RISC-CPU 100MHz
8 Megabytes
16 Megabytes
TG3 Series Service Manual