Hex Dump Mode - SATO 9001226(A) Service Manual

Section 4: Operation and Configuration

4.10 HEX DUMP MODE

HEX Dump Mode allows you to print the contents of the receive buffer in a hexadecimal format to allow the
data stream to be examined for errors and troubleshooting.
When HEX DUMP MODE is displayed, press the FEED button to enter HEX Dump mode.
Note:
PASSWORD may prompt on the display if SET PASSWORD is set to ON in the Service mode. Please
refer to Section 4.15 Service Mode for details on how to enter password.
Menu
Page 4-30
FEED
ONLINE button
button
FUNCTION
button
FEED button
FUNCTION
button
Select RECEIVE DATA +
FEED button
HEX dump print
Executing HEX dump
print of receive data
HEX DUMP MODE
You can choose to dump either incoming data ( RECEIVE DATA ) or print data
already stored in the buffer ( RECEIVE BUFFER ).
The initial value is RECEIVE DATA .
Note that RECEIVE BUFFER cannot be selected when there is no received
data.
During HEX Dump Mode, the icon
* Press
item or set the value accordingly.
The active arrow icons are displayed
on the screen.
Displayed only when entry
of PASSWORD is enabled
Select RECEIVE BUFFER +
FEED button
FEED button
HEX dump print
After executing HEX dump print
of receive buffer data (1 item),
the printer will enter ONLINE
mode.
Description
is displayed in the ONLINE screen.
, , or button to select
TG3 Series Service Manual