Universal Serial Bus (Usb) Interface - SATO 9001226(A) Service Manual

3.4 UNIVERSAL SERIAL BUS (USB) INTERFACE

The Universal Serial Bus (USB) interface is a Plug-In Interface Module that can be installed by the user. It
requires a driver (shipped with each printer that has the interface installed) that must be loaded on your PC
and the PC must be configured to support USB peripherals using Windows 2000 or above. Details for loading
the USB driver are contained in the USB Interface Manual that is shipped with each printer with a USB
Optional interface installed. Up to 127 devices may be connected to a USB port using powered hubs.
3.4.1 Basic Specifications
Interface connector
Version
Maximum receive
buffer capacity
3.4.2 Pin Assignments
Pin No. Description
1
2 -Data(D-)
3 +Data(D+)
4
TG3 Series Service Manual
Series B plug
Cable length: 5m or less (Twisted Pair Shielded)
USB 2.0
2.95MB
0MB
Buffer near full
occurred
Buffer near full
released
VBus
GND
Section 3: Interface Specifications
2.95MB
Remaining 0.95MB
Remaining 1.95MB
Page 3-9