Adjustment Screen - SATO 9001226(A) Service Manual

Section 4: Operation and Configuration

4.4 ADJUSTMENT SCREEN

The printer has a quick access to the Adjustment screen for setting the print position, stop position and the
print darkness. These adjustments are in conjunction with the configuration adjustments done in the Service
mode menu and the User mode menu.
When the printer is Offline, pressing both the FUNCTION and
1.
the printer to Adjustment mode. The PITCH POSITION screen is displayed.
Press arrow buttons to set the desired value and press FEED button to save the setting and proceed
2.
/
to the next Adjustment screen.
Menu
After adjustment, press ONLINE button or FUNCTION button to exit the Adjustment screen and returns to
3.
Offline mode.
Pressing the ONLINE button or FUNCTION button before pressing the FEED button will not save the
adjustment.
You may wish to print a test print after completing the adjustments to ensure they are correct. Refer to
Section 4.12 Test Print Mode for details.
Page 4-10
Offline mode
Press FUNCTION
+ buttons
FEED
button
Press ONLINE button or
FUNCTION button
Offline mode
Adjusts the print position or reference point where the printings begins verti-
cally, relative to the leading edge of each media.
Setting value is adjustable by 0.01" (0.25 mm) regardless of print resolution.
Setting range is ± 0.15" (3.75 mm) and the initial value is +0.00" (0.00 mm).
Adjust the stop (cut) position of each media after printing.
Setting value is adjustable by 0.01" (0.25 mm), regardless of print resolution.
Setting range is ±0.15" (3.75 mm), and the initial value is +0.00" (0.00 mm).
Adjust the print darkness of the print-out.
Setting range is between 00 and 99, and the initial value is 50.
Note :
It is not advisable to set the print darkness to the higher position as a darker
print-out requires the print head to operate in a higher temperature. Operat-
ing in high temperature may damage the print head over time.
* Press or button to set the value.
FEED FEED
button button
arrow buttons at the same time will switch
Description
TG3 Series Service Manual