SATO 9001226(A) Service Manual page 10

Section 1: Introduction
1.3 PARTS IDENTIFICATION (cont'd)
Back view
6
7
8
9
6 Interface slot
Optional interface slot for connection to a host
PC. An option of RS-232C (High-speed)
interface board, IEEE1284 interface board,
LAN interface board, Wireless LAN interface
board and USB interface board are available
for connection.
External connector terminal (EXT)
7
Interface connector for external signals.
Connect the optional stacker or rewinder to this
terminal.
Page 1-4
FUSE (T5AH 250V) holder
8
Used to hold a fuse which protect the printer
from unstable power supply surge. Use fuse
with rating, T5AH 250V only.
AC IN power terminal
9
Supplies power to the printer by inserting the
power cable.
Before connection, ensure that the AC voltage
of your region is within the range of AC 100 to
240V, 50/60 Hz.
TG3 Series Service Manual