SATO 9001226(A) Service Manual page 103

4.15 SERVICE MODE (Cont'd)
4.15.3 Cut Offset adjustment in Service Mode
ONLINE button
FUNCTION
button
Return to SERVICE MODE menu
Menu
TG3 Series Service Manual
Select CUT OFFSET +
FEED button
* Press
item or set the value accordingly.
The active arrow icons are displayed
on the screen.
FEED button
CUT OFFSET MODE
Adjusting cut offset for each type of media.
Select a media type with
Use arrow buttons to enter adjusted value.
/
"+" for moving the cut position forward.
"-" for moving the cut position backward, against paper feed direction.
The adjustment range is between ± 00 and 99 dots.
For the initial value of each media type and model, refer to the chart below.
Media Sensor
Tag Center hole
Side hole
Edge
I-Mark
Label Gap
I-Mark
Others Not sensor
Section 4: Operation and Configuration
, , or button to select
Description
arrow buttons.
/
TG308
+00
+00
+00
-12
-12
-36
+00
TG312
+00
+00
+00
-18
-18
-54
+00
Page 4-63