SATO 9001226(A) Service Manual page 79

4.12 TEST PRINT MODE (Cont'd)
Item name to be printed
Character Pitch or
Char. Pitch
Print Method
Reflective Sensor
Low [Lo<1.0] x.x(V)
High [0.8<Hi-Lo] x.x(V)
Slice Level Auto
Transmissive Sensor
Low [0.2<Lo<1.0] x.x(V)
High [0.8<Hi-Lo] x.x(V)
Slice Level Auto
Head Check
Check P-Size
Calendar
Calendar Check or Check
Command Error or
Cmd Err
Protocol Code or
P-Code
Euro Code
DSW1
DSW2
TG3 Series Service Manual
Character pitch setting.
For proportional pitch, "Proportional" will be printed.
For fixed pitch, "Fixed" will be printed.
Print method.
For thermal transfer printing, "Thermal Transfer" or "Transfer" will
be printed. For direct thermal printing, "Direct Thermal" or "Direct"
will be printed.
This information will be printed when reflective sensor is enabled.
If "Low" is not [Low < 1.0], "Low" will be indicated in reverse colors.
If "High" is not [0.8 < (High-Low)], "High" will be indicated in reverse
colors.
This information will be printed when transmissive sensor is enabled.
If "Low" is not [0.2 < Low < 1.0], "Low" will be indicated in reverse
color.
If "High" is [0.8 < (High-Low)], "High" will be indicated in reverse
colors.
The setting of head check function.
"None" will be printed when this function is off. When this function
is enabled and it is checking the actual printable area, "Normal" will
be printed.
For checking barcode print area, "Barcode" will be printed.
The setting of paper size check function.
"Enabled" will be printed when this function is on. If not, "Disabled"
will be printed.
Calendar display. If calendar IC is not installed in the printer,
"None" will be printed.
Calendar format is "YY/MM/DD/HH/MM".
The setting of calendar check.
"Enabled" will be printed if calendar check is on. If not, "Disabled"
will be printed.
Note that this information will not be printed without installing the
calendar IC.
The setting of command error display.
"Error" will be printed if this setting is enabled. If not, "Warning" will
be printed.
Protocol code setting.
For standard protocol, "Standard" will be printed. For non standard
protocol, "Non Standard" will be printed.
Also, the protocol code stored in the printer will be printed.
Euro code setting.
Prints DSW setting on CONT board (Main PCB).
When RS-232C interface board is connected, the DSW information
on the interface board will be printed.
Section 4: Operation and Configuration
Description
Page 4-39