SATO 9001226(A) Service Manual page 105

4.15 SERVICE MODE (Cont'd)
4.15.5 Loading Offset adjustment in Service Mode
ONLINE button
FUNCTION
button
Return to SERVICE MODE menu
Menu
TG3 Series Service Manual
Select LOADING OFFSET +
FEED button
* Press
item or set the value accordingly.
The active arrow icons are displayed
on the screen.
FEED button
LOADING OFFSET MODE
Adjusting the print start position right after performing automatic feeding func-
tion for each type of media.
Select a media type with
Use arrow buttons to enter adjusted value.
/
"+" for moving the print start position (after auto media feed) forward.
"-" for moving the print start position (after auto media feed) backward, against
media feed direction.
The adjustment range is between ± 00 and 99 dots.
The initial value of each media type is +00.
Section 4: Operation and Configuration
, , or button to select
Description
arrow buttons.
/
Page 4-65