Service Mode - SATO 9001226(A) Service Manual

Section 4: Operation and Configuration

4.15 SERVICE MODE

In SERVICE MODE menu, you can program various dimensional settings of the printer. Press
buttons to select SERVICE LEVEL, PITCH OFFSET, CUT OFFSET, BACKFEED OFFSET, LOADING
OFFSET or SETTING, and then press FEED button to enter the selected mode. Refer to the following
flowcharts of the settings and LCD display menus available in SERVICE MODE.
4.15.1 Overview of Sensor Level adjustment in Service Mode
ONLINE button
FUNCTION
button
ONLINE button
FUNCTION
button
ONLINE button
FUNCTION
button
ONLINE button
FUNCTION
button
ONLINE button
FUNCTION
button
ONLINE button
FUNCTION
button
Return to SERVICE MODE menu
When SENSOR LEVEL is displayed, pressing the FEED button repeatedly will switch to the next setting
1.
option as shown above. To return to the previous setting option, press ONLINE button.
When the desired setting option is displayed, press arrow buttons to select the item or to set the value and
2.
then press FEED button to save the setting.
Page 4-60
Select SENSOR LEVEL
+ FEED button
or
button
FEED button
or
button
FEED button
FEED button
FEED button
FEED
button
or
button
FEED button
* Press , , or button to select
item or set the value accordingly.
The active arrow icons are displayed
on the screen.
or
button
TG3 Series Service Manual
/ arrow