SATO 9001226(A) Service Manual page 74

Section 4: Operation and Configuration
4.11 RFID USER MODE (Cont'd)
Menu
Page 4-34
RFID USER MODE
Performing write test to RFID tag.
Select YES and press FEED button to proceed the RFID tag writing test.
If NO is selected, the printer goes to RFID TEST menu.
The initial value is NO.
This screen appears only when TAKAYA or ThingMagic is set to MODULE
SELECT in the Service Mode.
Showing the data is successfully written on the RFID tag.
Press FEED button to exit from this screen.
This screen appears only when TAKAYA or ThingMagic is set to MODULE
SELECT in the Service Mode.
This message appears when failing to write on RFID tag.
Select YES and press FEED button to repeat the RFID writing test.
If NO is selected, printer goes to ONLINE mode.
The initial value is NO.
This screen appears only when TAKAYA or ThingMagic is set to MODULE
SELECT in the Service Mode.
Description
TG3 Series Service Manual