Section 4: Operation and Configuration
4.12 TEST PRINT MODE (Cont'd)
Item name to be printed
RFID Current Counter
RFID Success or Success
RFID Failure or Failure
RFID Total or Total
Module
RFID Setting
Max Error Count
RFID I/O Base
4.12.2 Test Print List of Barcodes
Barcodes supported by this printer will be printed as shown below. Barcodes to be printed may differ
depending on the test print size.
Page 4-42
The number of succeeded/ failed RFID tag writes and the total tag
count. Note that the count after reset or [CLEAR RFID COUNT] will
be shown in this item.
The number of RFID tags successfully written.
The number of RFID tag write failures.
The number of RFID tag writes.
(Sum of write successes and failures)
RFID module name
Section header of RFID setting.
The counter for void and reprint RFID tags at the time of write fail-
ure.
Data format when writing to RFID tag.
Description
TG3 Series Service Manual