Interface Mode; Overview Of Interface Mode Configurations - SATO HR2 Series Operator's Manual

3.7 INTERFACE MODE

In this mode, you can set various parameters governing the use of interface cards.

3.7.1 Overview of Interface Mode Configurations

HR2 Series Operator Manual
LINE
button
FEED button
Press and hold
LINE button
LINE
button
Select NO +
FEED button
Press and hold
LINE button
LINE
button
Press and hold
LINE button
LINE
button
Press and hold
LINE button
LINE
button
Return to INTERFACE MODE menu
+
-
FEED
button
Displayed only when entry
of PASSWORD is enabled
+
-
FEED
button
Select
YES +
FEED
Select SUB
button
PORT +
FEED button
LINE
button
Select DATA
PORT +
FEED button
LINE
button
FEED
button
Setting contents differ by selected I/F
To the setting of LAN
To the setting of RS-232C
To the setting of USB
FEED
button
Section 3: Operation and Configuration
* Press <, >, + or - button to select
item or set the value accordingly.
The active arrow icons are displayed
on the screen.
FEED
button
Displayed only in the
case of SUB PORT
Page 3-15