SATO 9001226(A) Service Manual page 91

4.12 TEST PRINT MODE (Cont'd)
Item name to be printed
FROM2 CHECK SUM
FROM3 CHECK SUM
FROM4 CHECK SUM
4.12.9 Explanation of the contents of each pieces of Factory Test Print (Small size)
Below are Factory Test print samples (Small Size). Printed contents are subject to change without notice and
the values are depends on individual settings.
First piece
TG3 Series Service Manual
Extended memory, LCD data, UNICODE conversion table, check-
sum value of TTF header area, and CODE39 barcode. Note that
checksum value may change by destination.
Checksum value of TTF/outline font and CODE39 barcode.
Checksum value when TTF/outline font is not registered will be
"0000".
Note that checksum value may change by destination.
Checksum value of Kanji ROM and CODE39 barcode. Note that
checksum value may change by destination.
Checksum value without Kanji ROM will be "0000".
Second piece
Section 4: Operation and Configuration
Description
Third piece
Page 4-51