SATO 9001226(A) Service Manual page 125

No. ERROR DISPLAY
25 MEDIA ERROR
26 COMMAND ERROR
• Command
information of
detected error will
be shown at the
bottom of LCD.
27 LATCH OPEN
TG3 Series Service Manual
LED BUZZER
ONLINE: 3 short 1) Specified media size is
Off Beeps not correct.
ERROR: To clear error: Head open
Blinks and then close
ONLINE: 3 short 1) Detecting improper
Off Beeps command or parameter
while printing.
ERROR:
Blinks • This screen appears only
when command error
display is enabled in
Advanced Mode.
To clear error: Press
ONLINE button.
ONLINE: 3 short 1) Lid latch is not locked
Off Beeps properly.
ERROR: 2) Latch open sensor failure.
Blinks
To clear error: Close lid latch
ERROR CONDITION
Section 5: Troubleshooting
CORRECTIVE ACTION
1) Set the specified size media
1) Check print data.
1) Lock lid latch.
2) Adjust or replace latch open
sensor.
Page 5-5