Rfid Mode - SATO 9001226(A) Service Manual

4.17 RFID MODE

After installing the RFID module to the printer, you need to activate the RFID module through the printer
configuration.
(* Please check with SATO reseller on the availability of the RFID kit.)
ONLINE button
FUNCTION
button
ONLINE button
FUNCTION
button
ONLINE button
FUNCTION
button
ONLINE button
FUNCTION
button
Return to MAINTENANCE MODE menu
When MAINTENANCE MODE is displayed, press
1.
RFID MODE.
When RFID MODULE is displayed, press
2.
button to activate the installed RFID module.
Pressing FEED button repeatedly will switch to the next setting option as shown above. To return to the
previous setting option, press ONLINE button.
When the desired setting option is displayed, press arrow buttons to select the item or to set the value and
3.
then press FEED button to save the setting
TG3 Series Service Manual
Select RFID MODE
+ FEED button
Select DISABLE
+ FEED button
Select ENABLE +
FEED button
Select module +
FEED button
FEED button
FEED button
Displayed only
when ThigMagic
is selected for
module.
FEED button
arrow buttons and then FEED button to enter
/
arrow buttons to select ENABLE and press the FEED
/
Section 4: Operation and Configuration
* Press , , or button to select
item or set the value accordingly.
The active arrow icons are displayed
on the screen.
Page 4-73