SATO 9001226(A) Service Manual page 104

Section 4: Operation and Configuration
4.15 SERVICE MODE (Cont'd)
4.15.4 Backfeed Offset adjustment in Service Mode
ONLINE button
FUNCTION
button
Return to SERVICE MODE menu
Menu
Page 4-64
Select BACKFEED OFFSET
+ FEED button
* Press
item or set the value accordingly.
The active arrow icons are displayed
on the screen.
FEED button
BACKFEED OFFSET MODE
Adjusting backfeed distance for each type of media.
Select a media type with
Use arrow buttons to enter adjusted value.
/
"+" for moving the print start position (after backfeed) forward.
"-" for moving the print start position (after backfeed) backward, against media
feed direction.
The adjustment range is between ± 00 and 99 dots.
The initial value of each media type is +00.
, , or button to select
Description
arrow buttons.
/
TG3 Series Service Manual