SATO 9001226(A) Service Manual page 81

4.12 TEST PRINT MODE (Cont'd)
3) Third piece -- RFID information will be printed. Note that this test print is available only when [RFID
MODULE] is enabled.
Item name to be printed
MODEL NAME or
MODEL
ROM NO. or
ROM
DATE
RFID Life Counter
RFID Success or Success
RFID Failure or Failure
RFID Total or Total
TG3 Series Service Manual
Printer model name.
Firmware version.
Created date of firmware.
Date format is indicated by the last 2 digits of the year, month and
day.
The number of succeeded/ failed RFID tag writes and the total tag
count. Note that the count after reset will be shown in this item.
The number of write successes to RFID tag.
The number of write failures to RFID tag.
The total tag writing counts.
(Sum of write successes and failures).
Section 4: Operation and Configuration
Description
Page 4-41