Section 3: Interface Specifications
3.6 WIRELESS LAN ETHERNET
3.6.1 Basic Specifications
Interface connector
Link/Status LED
Page 3-12
LINK LED
Status LED
Wireless LED
LINK LED
Status LED
Cable type: For 10BASE-T and 100BASE-TX
Cable length: 100m or less
Status LED lights up when establishing the LINK with Ethernet device or when
receiving the packets. The LINK is established by Auto Negotiation.
Connector built-
in LED
LINK
STATUS
LED
LINK
STATUS
Wireless
Wireless LAN Interface board
Color
Green
Blinks: Waiting for the link detection of
wired LAN
On: Establishing the link by wired LAN
Off: Wired LAN not in use
Orange
Not in use (Off)
Color
Green
Blinks: Waiting for the link detection of wire-
less LAN
On: Establishing the link by wireless LAN
Off: Wireless LAN not in use
Orange
Blinks: Lights up for a given length of time
when receiving packets by wireless LAN
Green
Blinks: Ad hoc mode
On: Infrastructure mode
DSW
Conditions
Conditions
TG3 Series Service Manual