SATO 9001226(A) Service Manual page 109

4.16 FACTORY MODE (Cont'd)
Select NO +
FEED button
FUNCTION
button
FUNCTION
button
FUNCTION
button
FUNCTION
button
Return to MAINTENANCE
MODE menu
When MAINTENANCE MODE is displayed, press
1.
TORY MODE.
Pressing FEED button repeatedly will switch to the next setting option as shown above. To return to the
2.
previous setting option, press ONLINE button.
When the desired setting option is displayed, press arrow buttons to select the item or to set the value and
3.
then press FEED button to save the setting.
TG3 Series Service Manual
Continued from INTERFACE BOARD
REVISION screen on the previous page
FEED button
ONLINE button
Select YES +
FEED button
ONLINE button
FEED button
ONLINE button
FEED button
ONLINE button
Select this item to enable
batch separator when
using tag as paper type.
FEED
button
ONLINE button
FEED button
Test print
Section 4: Operation and Configuration
Press , or PAPER
button to select the paper
type.
Press CUTTER button to
set the cutter motion.
or
button
FEED button
arrow buttons and then FEED button to enter FAC-
/
* Press , , or button to select
item or set the value accordingly.
The active arrow icons are displayed
on the screen.
* Pressing FUNCTION button on each
screen will revert to MAINTENANCE
MODE menu.
Page 4-69