SATO 9001226(A) Service Manual page 66

Section 4: Operation and Configuration
4.9 ADVANCED MODE (Cont'd)
During Offline mode, press FUNCTION button to display the operational icon menu. Press arrow buttons
1.
to select ADVANCED MODE.
When ADVANCED MODE is displayed, press the FEED button to enter Advanced mode for adjustment.
2.
Note:
PASSWORD may prompt on the display if SET PASSWORD is set to ON in the Service mode. Please
refer to Section 4.15 Service Mode for details on how to enter password.
DARKNESS RANGE is first displayed. Press the FEED button repeatedly will switch to the next setting
3.
options as shown above. To return to the previous setting option, press ONLINE button.
When the desired setting option is displayed, press arrow buttons to select the item or to set the value and
4.
then press FEED button to save the setting.
Menu
Page 4-26
ADVANCED MODE
Setting print darkness range.
Available options are from A to F, with F being the darkest density.
Only supported range is displayed.
The initial setting is at A.
Note : Adjustment of this setting is usually unnecessary.
Setting print method to thermal transfer or direct thermal.
TRANSFER : Thermal transfer
DIRECT : Direct thermal
The initial value is TRANSFER.
The printer can perform the pitch size check of the loaded media if the A1 com-
mand, which fixed the size of the media, is sent to the printer. If the printer
detected the media size has fallen out of the range of ± 0.1" (2.5 mm) from the
set pitch size, MEDIA ERROR will be displayed.
ENABLE : Paper size check is ON
DISABLE : Paper size check is OFF
The initial value is DISABLE.
Enabling/ Disabling the display of command error.
This setting determines the printer motion when detecting a command error.
YES : Stops printing operation when command error is occurred.
NO : Displays a warning icon and continues printing operation.
The initial value is NO.
The printer can be set to go into ONLINE mode automatically after feeding the
media automatically. Otherwise, the printer starts in the OFFLINE state.
YES : The printer goes online after feeding the paper automatically.
NO : The printer goes offline after feeding the paper automatically.
The initial value is YES.
Description
TG3 Series Service Manual