SATO 9001226(A) Service Manual page 87

4.12 TEST PRINT MODE (Cont'd)
Item name to be printed
Firm Date
Life Counter
Head Counter 1
Head Counter 2
Head Counter 3
Cutter Counter
Head-Check [All]
S/N
CONT S/N
Main PCB Revision
I/F Board Revision
Reflective Sensor
Low [Lo<1.0] x.x(V)
High [0.8<Hi-Lo] x.x(V)
Slice Level Auto
Transmissive Sensor
Low [0.2<Lo<1.0] x.x(V)
High [0.8<Hi-Lo] x.x(V)
Slice Level Auto
2) Second piece -- Sensor information, setting values in Service Mode, VR (Potentiometer), offset values for
each paper type will be printed.
Item name to be printed
Reflective Sensor
Low [Lo<1.0] x.x(V)
High [0.8<Hi-Lo] x.x(V)
Slice Level Auto
TG3 Series Service Manual
Created date of firmware.
Print format is indicated by the last 2 digits of the year, month and
day.
Printed life expectancy in "m" scale.
Print head life expectancy in "m" scale.
The number of times in which paper was cut.
Checks print head condition and prints its result.
If print head fails the test, its result, "NG", will be indicated in
reverse colors.
Serial number of printer. CODE39 barcode will be printed on the
following line.
Serial number of CONT board (Main PCB). CODE39 barcode will
be printed on the following line.
CONT board (Main PCB) version. CODE39 barcode will be printed
on the following line.
Interface version. CODE39 barcode will be printed on the following
line.
This information will be printed when reflective sensor is enabled.
If "Low" is not [Low < 1.0], "Low" will be indicated in reverse colors.
If "High" is not [0.8 < (High-Low)], "High" will be indicated in reverse
colors.
This information will be printed when transmissive sensor is
enabled.
If "Low" is not [0.2 < Low < 1.0], "Low" will be indicated in reverse
color.
If "High" is [0.8 < (High-Low)], "High" will be indicated in reverse
colors.
This information will be printed when reflective sensor is enabled.
If "Low" is not [Low < 1.0], "Low" will be indicated in reverse colors.
If "High" is not [0.8 < (High-Low)], "High" will be indicated in reverse
colors.
Section 4: Operation and Configuration
Description
Description
Page 4-47