SATO 9001226(A) Service Manual page 119

4.19 BOOT DOWNLOAD MODE (Cont'd)
Menu
TG3 Series Service Manual
BOOT DOWNLOAD MODE
The printer is waiting to receive data.
Firmware data will be received from the PC and written to main ROM.
(1) Firmware data
The printer is downloading data.
The gauge shown on the lower portion of the screen indicates downloading
status.
The printer is writing data to main ROM.
The gauge shown on the lower portion of the screen indicates data writing sta-
tus.
Verifying data.
Received data and write data are verified.
The gauge shown on the lower portion of the screen indicates data verification
status.
Program download is completed.
You will hear 3 short beeps when program download is completed.
Press FEED to go to PROGRAM DOWNLOAD READY screen.
Section 4: Operation and Configuration
Description
Page 4-79