Basic Specifications; Printer Basic Specifications - SATO 9001226(A) Service Manual

BASIC SPECIFICATIONS

2.1 PRINTER BASIC SPECIFICATIONS

MODEL NAME
PHYSICAL CHARACTERISTICS
Width
Height
Depth
Weight
POWER SUPPLY
Input Voltage
Power Consumption
ENVIRONMENTAL (EXCLUDING MEDIA)
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
PRINT
Method
Print Speed (selectable)
Resolution
Maximum Print Width
Maximum Print Length
Print darkness
TG3 Series Service Manual
Input power voltage: AC 100V - 240V, +/-10% (Full range)
Rated input voltage: AC 100V - 240V (Full range)
When not using an optional device:
When stacker and Keypad are
connected:
30 to 80% RH, Non-condensing
30 to 90% RH, Non-condensing
Thermal Transfer and Direct Thermal
2 to 10 inches/second (50 to 250 mm/second)
(Setting value: 2, 3, 4, 5, 6, 7, 8, 9, 10)
*Print speed varies depending on the type of media used.
TG308: 203 dots per inch (8 dots/mm)
TG312: 305 dots per inch (12 dots/mm)
Section 2: Basic Specifications
TG308 / TG312
11.18" (284 mm)
11.81" (300 mm)
21.73" (552 mm)
35.71 lbs. (16.2 Kg)
At peak: 132W / 134VA (Print ratio 30%)
In standby: 20W / 22VA
At peak: 157W / 161VA (Print ratio 30%)
In standby: 25W / 28VA
5° to 40°C (41 to 104 F)
-5° to 60°C (23 to 140 F)
3.1" (80 mm)
9.4" (240 mm)
Darkness range: A to F
Darkness level: 1 to 3
Page 2-1