SATO 9001226(A) Service Manual page 102

Section 4: Operation and Configuration
4.15 SERVICE MODE (Cont'd)
4.15.2 Pitch Offset adjustment in Service Mode
ONLINE button
FUNCTION
button
Return to SERVICE MODE menu
Menu
Page 4-62
Select PITCH OFFSET
+ FEED button
* Press
item or set the value accordingly.
The active arrow icons are displayed
on the screen.
FEED button
PITCH OFFSET MODE
Adjusting pitch offset for each type of media.
Select a media type with
Use arrow buttons to enter adjusted value.
/
"+" for moving the pitch position forward.
"-" for moving the pitch position backward, against paper feed direction.
The adjustment range is between ± 00 and 99 dots.
For the initial value of each media type and model, refer to the chart below.
Media Sensor
Tag Center hole
Side hole
Edge
I-Mark
Label Gap
I-Mark
, , or button to select
Description
arrow buttons.
/
TG308
+00
+00
+00
-12
-12
-36
TG312
+00
+00
+00
-18
-18
-54
TG3 Series Service Manual