Adjustment Screen - SATO HR2 Series Operator's Manual

Table of Contents

3.4 ADJUSTMENT SCREEN

The printer has a quick access to the Adjustment screen for setting the print position, stop position and the

print darkness. These adjustments are in conjunction with the configuration adjustments done in the Service

mode menu and the User mode menu.

Press LINE button

1. When the printer is OFFLINE, pressing both the

printer to Adjustment mode. The setting screen is displayed.

2. Press +/- buttons to set the desired value and press FEED button to save the setting and proceed to the

next Adjustment screen.

3. After adjustment, press LINE button to exit the Adjustment screen and returns to OFFLINE mode.

Pressing the LINE button before pressing the FEED button will not save the adjustment.

You may wish to print a test print after completing the adjustments to ensure they are correct. Refer to

Section 3.13 Test Print Mode for details.

HR2 Series Operator Manual

Press

button

Press FEED button

QTY=0

Press FEED button

Section 3: Operation and Configuration

* Press + or - button to set the value.

and

arrow buttons at the same time will switch the

Page 3-9

Table of Contents

Show Quick Links

Table of Contents