Audible Alarms; Using Audible Alarms; Moving Participants Between Conferences - Polycom RealPresence 800s Administrator's Manual

Polycom® RealPresence Collaboration Server 800s Administrator's Guide

Audible Alarms

In addition to the visual cues used to detect events occurring on the Collaboration Server, an
audible alarm can be activated and played when participants request Operator Assistance.

Using Audible Alarms

The Audible Alarm functionality for Operator Assistance requests is enabled for each MCU
in either the Collaboration Server Web Client or RMX Manager.
The Audible Alarm played when Operator Assistance is requested is enabled and selected
in the Setup > Audible Alarm > User Customization. When the Audible Alarm is activated,
the *.wav file selected in the User Customization is played, and it is repeated according to the
number of repetitions defined in the User Customization.
If more than one Collaboration Server is monitored in the RMX Manager, the Audible Alarm
must be enabled separately for each Collaboration Server installed in the site/configuration.
A different *.wav file can be selected for each MCU.
When multiple Audible Alarms are activated in different conferences or by multiple MCUs,
the Audible Alarms are synchronized and played one after the other. It is important to note
that when Stop Repeating Alarm is selected from the toolbar from the Collaboration Server
Web Client or RMX Manager, all activated Audible Alarms are immediately halted.
For more details on Audible alarms and their configuration, see "Audible Alarms" on
page 20-33.

Moving Participants Between Conferences

The Collaboration Server User can move participants between ongoing conferences,
including the Operator conference, and from the Entry Queue to the destination conference if
help is required.
When moving between conferences or when a participant is moved from an Entry Queue to
a conference by the Collaboration Server user (after failure to enter the correct destination
ID or conference password), the IVR messages and slide display are skipped.
Move Guidelines
•
•
•
•
•
10-14
Move is available only between CP conferences. Move is unavailable from/to Video
Switching conferences.
Move between conferences can be performed without an active Operator conference.
When moving the conference chairperson from his/her conference to another
conference, the source conference will automatically end if the Auto Terminate When
Chairperson Exits option is enabled and that participant is the only conference
chairperson.
When moving the Operator to any conference (following assistance request), the IVR
messages and slide display are skipped.
Participants cannot be moved from LPR-enabled conferences to non-LPR conferences.
Move from non-LPR conferences to LPR-enabled conferences is available.
Polycom, Inc.