Figure 3-3 Communications Configuration; Table 3-1 Default Com Port Setting; Downloading The Oam Program - Polycom KIRK 8000 Configuration Manual

Downloading the OAM Program

Polycom, Inc.
To Change Communication Configuration Settings from the Startup window
From the Startup window, click the Change Communications
1
Configuration button. There is an automatic delay of 6 seconds that allows
you to click the button before the program starts.
Figure 3-3 Communications Configuration
From the Name list, select the connection whose settings you want to
2
change.
From the Type list select the preferred type of connection. You have the
3
following options:
Type
Null Modem Cable
Telnet
Modem
Offline
If you selected Null Modem Cable, in the Serial Device list, select the
4
COM port to which the IP modem has been installed, and then click OK.
The Kirk Wireless Server OAM program window appears.
If you selected Telnet, type the relevant IP Address and Port 10000, and
5
then click OK. The Kirk Wireless Server OAM program window appears.
If you selected Modem, in the Serial Device list, select the COM port to
6
which the modem has been installed, and then click OK. The Kirk Wireless
Server OAM program window appears.
Table 3-2 Connection Types
Definition
Use this to connect directly to a PC.
Use this for remote connection via LAN.
Use this to connect via modem.
Use this to view the OAM program without
being connected.
Installing the KWS8000 OAM Program
9