Polycom RealPresence 800s Administrator's Manual page 513

Collaboration server
Hide thumbs Also See for RealPresence 800s:
Table of Contents

Advertisement

Polycom, Inc.
Table 21-2
Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag
802_1X_SKIP_CERTIFICAT
E_VALIDATION
802_1X_CRL_MODE
802_FIPS_MODE
ACCEPT_VOIP_DTMF_TYP
E
ANAT_IP_PROTOCOL_SET
TING
APACHE_KEEP_ALIVE_TIM
EOUT
Description
If the flag value is:
• YES - The retrieved certificate is not validated against theCA
certificate.
• NO - The retrieved certificate is validated against the
CAcertificate. Validation failure raises an Active Alarm and
isreported in the Ethernet Monitoring dialog box.
Range: YES, NO
Default: YES
If the flag value is:
• ENABLED - Forces CRL checking. The system fails the
connection request if the certificate has been revoked or if
there is no CRL.
• OPTIONAL - The system fails the connection request if the
certificate is revoked but does not fail the connection request
if there is no CRL.
• DISABLED - Does not check the CRL and does not fail the
connection request based on the CRL content.
Range: ENABLED, OPTIONAL, DISABLED
Default: DISABLED
If the flag value is YES, the availability of the MD5
Authentication Protocol will neither be displayed as selectable
option nor supported.
Range: YES/NO.
Default: NO
Defines the type of DTMF tones (inband) or digits (outband)
that the Collaboration Server will accept in VOIP calls.
Range:
0 - Auto (default):
Inband or outband DTMF tones/digits are accepted
depending on the endpoint's current setting. If the
endpoint switches from inband to outband or visa versa
the value of the SET_DTMF_SOURCE_DIFF_IN_SEC
flag determines the time interval after which both inband
and outband tones/digits will be accepted.
1 - Outband (H.245) only
2 - Inband only
If YES, enables Alternative Network Address Types.
Range: DISABLED, AUTO, PREFER_IPv4, PREFER_IPv6
Default: YES
If the connection is idle for longer than the number of seconds
specified by this flag, the connection to the Collaboration
Server is terminated.
Value: 0 - 999
Default: 15
Note: A value of 0 results in an unlimited keep-alive duration.
Chapter 21-System Configuration Flags
21-13

Advertisement

Table of Contents
loading

Table of Contents