Recording Link Encryption; Encryption Flag Settings - Polycom RealPresence 800s Administrator's Manual

Recording Link Encryption

Recording Links are treated as regular participants, however the
ALLOW_NON_ENCRYPT_RECORDING_LINK_IN_ENCRYPT_CONF System Flag must
be set to YES if a non-encrypted Recording Link is to be allowed to connect to an encrypted
conference.
Table 3-18 summarizes the connection possibilities for a Recording Link that is to be
connected to a conference for each of the conference profile and Entry Queue encryption
options.
Table 3-13
Conference
Profile Setting
Encrypt All
No Encryption
Encrypt when possible

Encryption Flag Settings

To modify the Encryption flags:
1
2
3
4
5
Polycom, Inc.
Connections by Recording Link and Conference Encryption Settings
Connected encrypted if possible,
otherwise connected non-
encrypted.
Connected non-encrypted
Connected encrypted if possible,
otherwise connected non-
encrypted.
Click Setup>System Configuration.
The System Flags dialog box opens.
Set the
FORCE_ENCRYPTION_FOR_UNDEFINED_PARTICIPANT_IN_WHEN_AVAILA
BLE_MODE flag to YES or NO.
If recording will be used in encrypted conferences, set the
ALLOW_NON_ENCRYPT_RECORDING_LINK_IN_ENCRYPT_CONF flag to YES
or NO.
Click OK.
For more information, see "Modifying System Flags" on page 21-1.
Reset the MCU for flag changes to take effect.
Recording Link Connection Status according to flag:
ALLOW_NON_ENCRYPT_RECORDING_
LINK_IN_ENCRYPT_CONF
YES
Chapter 3-Additional Conferencing Information
NO
Connected only if encrypted,
otherwise disconnected
Connected non-encrypted
Connected encrypted if possible,
otherwise connected non-
encrypted.
3-33