Polycom RealPresence 800s Administrator's Manual page 40

Polycom® RealPresence Collaboration Server 800s Administrator's Guide
3
4
2-20
Define the Profile name and, if required, the Profile - General parameters:
Table 2-8 New AVC CP Profile - General Parameters
Field/Option
Display Name
Line Rate
Conferencing Mode
Routing Name
Operator Conference
Click the Advanced tab.
Description
Enter a unique Profile name, as follows:
•
English text uses ASCII encoding and can contain the most
characters (length varies according to the field).
•
European and Latin text length is approximately half the length of
the maximum.
•
Asian text length is approximately one third of the length of the
maximum.
It is recommended to use a name that indicates the Profile type, such
as Operator conference or Video Switching conference.
Note: This is the only parameter that must be defined when creating
a new profile.
Note: This field is displayed in all tabs.
Select the conference bit rate. The line rate represents the combined
video, audio and Content rate.
The default setting is 384 Kbps.
Notes:
•
This field is displayed in all tabs.
For CP conferencing, make sure that CP (Continuous Presence) is
selected to define a CP conference Profile.
Note: This field is displayed in all tabs.
Enter the Profile name using ASCII characters set.
The Routing Name can be defined by the user or automatically
generated by the system if no Routing Name is entered as follows:
•
If an all ASCII text is entered in Display Name, it is used also as
the Routing Name.
•
If any combination of Unicode and ASCII text (or full Unicode text)
is entered in Display Name, the ID (such as Conference ID) is
used as the Routing Name.
Select this option to define the profile of an Operator conference.
For more information, see Chapter 10, "Operator Assistance &
Participant Move" on page 10-1.
Polycom, Inc.