Status Trap; Defining The Snmp Parameters In The Collaboration Server - Polycom RealPresence 800s Administrator's Manual

3
Each trap is sent with a time stamp, the agent address, and the manager address.

Status Trap

The MCU sends status traps for the status MAJOR - a trap is sent when the card/MCU
status is MAJOR.
All traps are considered "MAJOR".

Defining the SNMP Parameters in the Collaboration Server

The SNMP option is enabled via the Collaboration Server Web Client application.
The addresses of the Managers monitoring the MCU and other security information are
defined in the Collaboration Server Web Client application and are saved on the MCU's hard
disk. Only users defined as Administrator can define or modify the SNMP security
parameters in the Collaboration Server Web Client application.
Polycom, Inc.
Alarm Fault trap. The third trap type is a family of traps defined in the POLYCOM-
RMX-MIB file, these traps are associated with the Collaboration Server active alarm and
clearance (proprietary SNMP trap).
rmxFailedConfigUserListInLinuxAlarmFault notification received
from: 172.22.189.154 at 5/20/2007 7:04:22 PM
Time stamp: 0 days 00h:01m:11s.71th
Agent address: 172.22.189.154 Port: 32777 Transport: IP/UDP
Protocol: SNMPv2c Notification
Manager address: 172.22.172.34 Port: 162 Transport: IP/UDP
Community: public
Bindings (6)
Binding #1: sysUpTime.0 *** (timeticks) 0 days
00h:01m:11s.71th
Binding #2: snmpTrapOID.0 *** (oid)
rmxFailedConfigUserListInLinuxAlarmFault
Binding #3: rmxAlarmDescription *** (octets) Insufficient
resources
Binding #4: rmxActiveAlarmDateAndTime *** (octets) 2007-6-
19,16:7:15.0,0:0
Binding #5: rmxActiveAlarmIndex *** (gauge32) 2
Binding #6: rmxActiveAlarmListName *** (octets) Active
Alarm Table
* Binding #7: rmxActiveAlarmRmxStatus *** (rmxStatus) major
Figure 3 An Example of an Alarm Fault Trap
Chapter 20-MCU Administration and Utilities
20-21