Polycom RealPresence 800s Administrator's Manual page 585

Collaboration server
Hide thumbs Also See for RealPresence 800s:
Table of Contents

Advertisement

Table C-18
Field
Network Type
H.243 Password
Chair
Video Protocol
Broadcasting
Volume
Undefined
Participant
Node Type
Bonding Phone
Number
Video Bit Rate
IP Address
Signaling Port
Polycom, Inc.
Event Fields for Event 18 - NEW UNDEFINED PARTICIPANT (Continued)
Description
The type of network between the participant and the MCU, as follows:
2 - H.323
5 - SIP
Not supported.
This field remains empty.
Not supported.
Always contains the value 0.
The video protocol, as follows:
1 - H.261
2 - H.263
4 - H.264
255 -
Auto
The broadcasting volume assigned to the participant.
The value is between 1 (lowest) and 10 (loudest).
Each unit movement increases or decreases the volume by 3 dB.
Indicates whether are not the participant is an undefined participant, as
follows:
0 - The participant is not an undefined participant.
2 - The participant is an undefined participant.
The node type, as follows:
0 - MCU
1 - Terminal
Note: This field is only relevant to ISDN/PSTN participants.
The phone number for Bonding dial-out calls.
Bonding is a communication protocol that aggregates from two up to thirty 64
Kbps B channels together, to look like one large bandwidth channel.
The video bit rate in units of kilobits per second.
A value of 4294967295 denotes auto, and in this case, the rate is computed
by the MCU.
Note: This field is only relevant to IP participants.
The IP address of the participant.
An address of 4294967295 indicates that no IP address was specified for the
participant, and the gatekeeper is used for routing. In all other cases the
address overrides the gatekeeper.
Note: This field is only relevant to IP participants.
The signaling port used for participant connection.
A value of 65535 is ignored by MCU.
Appendix C-CDR Fields - Unformatted File
C-23

Advertisement

Table of Contents
loading

Table of Contents