Polycom RealPresence 800s Administrator's Manual page 344

RealPresence Collaboration Server 800s Administrator's Guide
2
3
4
16-36
In the Network Services list toolbar, click the
The New IP Service - Networking IP dialog box opens.
Define the following fields:
Table 16-24 IP Network Service - IP Parameters
Field
Network Service
Name
IP Network Type
Signaling Host IP
Address
Media Card IP
address
Subnet Mask
Optional. Some system flags can be defined per Network Service, depending on the
network environment.
To modify these flags, click the Service Configuration button.
Description
Enter the IP Network Service name.
Note: This field is displayed in all IP Signaling dialog boxes and can
contain character sets that use Unicode encoding.
Select the IP Network environment. You can select:
•
H.323: For an H.323-only Network Service.
•
SIP: For a SIP-only Network Service.
•
H.323 & SIP: For an integrated IP Service. Both H.323 and SIP
participants can connect to the Collaboration Server using this
service.
Note: This field is displayed in all Default IP Service tabs.
This field is disabled as only one IP address is used for the signaling
and media and it is defined by the IP address defined for the media.
If each of LAN ports designated for signaling and media (LAN2, LAN3
and LAN4) on the system can be used with a different network, each
port is assigned to its own Network Service.
In such a case, enter the IP address of the port to be assigned to this
Network Service.
A LAN port that is already assigned to a different Network Service,
displays the IP Address of the assigned port and it cannot be
assigned to this Network Service (it is disabled).
Enter the subnet mask of the Collaboration Server in that network
service.
Default value: 255.255.255.0.
Add Network Service button.
Polycom, Inc.