Enabling Secure Communication Mode - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server 800s Administrator's Guide
Table G-3
Flag
EXTERNAL_DB_PORT
The Collaboration Server must be restarted for modified flag settings to take effect.

Enabling Secure Communication Mode

After the SSL/TLS Certificate is installed, secure communications are enabled by modifying
the properties of the Management Network in the Management Network properties dialog box.
When Secure Communications Mode is enabled:
•
•
•
•
To enable secure communications mode:
1
2
3
4
5
G-6
System Flags (Continued)
Description
The external database server port used by the Collaboration Server to
send and receive XML requests/responses.
For secure communications set the value to 443.
Default: 5005.
Only https:// commands from the browser to the Control Unit IP Address of the
Collaboration Server are accepted.
The Collaboration Server listens only on secured port 443.
All connection attempts on port 80 are rejected.
A secure communication indicator ( ) is displayed in the browser's status bar.
In the Collaboration Server Management pane, click IP Network Services.
In the IP Network Services list pane, double-click the Management Network entry.
Click the Security tab.
The Management Security Properties dialog box is displayed.
Select the Secured Communication check box.
Click OK.
Polycom, Inc.