Starting The Rmx Manager Application - Polycom RealPresence 800s Administrator's Manual

Collaboration server

Hide thumbs Also See for RealPresence 800s:

Table of Contents

RealPresence Collaboration Server 800s Administrator's Guide

Starting the RMX Manager Application

Once installed, the RMX Manager can be run using the

(secured) command in the browser's address line or the Windows Start menu.

To use the browser:

To use the Windows Start menu:

For each listed MCU, the system displays the following information:

In the browser's command line, enter:

http://<MCU Control Unit IP Address>/RMXManager.html

https://<MCU Control Unit IP Address>/RMXManager.html

Press Enter.

Click Start > Programs.

If the RMX Manager is displayed in the recently used programs list, click RMX

Manager in the list to start the application.

Click All Programs > Polycom > RMX Manager.

The MCUs screen is displayed, listing the MCUs currently defined in the RMX Manager.

This screen enables you to add additional MCUs or connect to any of the MCUs listed.

For details on adding MCUs, see "Adding MCUs to the MCUs List" on page 12.

— MCU Display Name (as defined in the Add MCU dialog box).

— IP Address of the MCU's control unit

— Product Type - The MCU type: RealPresence Collaboration Server 800s,

RealPresence Collaboration Server (RMX) 1500, RealPresence Collaboration Server

(non-secured) or

Polycom, Inc.