Polycom RealPresence 800s Administrator's Manual page 577

Table C-8
Field
Conference End
Cause
Table C-11
Field
Participant Name
Participant ID
Call Disconnection
Cause
Q931 Disconnect
Cause
Table C-12
Field
Rx Synchronization
Loss
Tx Synchronization
Loss
Rx Video
Synchronization
Loss
Tx Video
Synchronization
Loss
Mux Board ID
Polycom, Inc.
Event Fields for Event 2 - CONFERENCE END
Description
Indicates the reason for the termination of the conference, as follows:
1 - The conference is an ongoing conference or the conference was
terminated by an MCU reset.
2 - The conference was terminated by a user.
3 - The conference ended at the scheduled end time.
4 - The conference ended automatically because no participants joined the
conference for a predefined time period, or all the participants disconnected
from the conference and the conference was empty for a predefined time
period.
5 - The conference never started.
6 - The conference could not start due to a problem.
8 - An unknown error occurred.
9 - The conference was terminated by a participant using DTMF codes.
Event Fields for Event 7 - PARTICIPANT DISCONNECTED
Description
The name of the participant.
The identification number assigned to the participant by the MCU.
The disconnection cause. For more information about possible values, see
Table C-39, "Disconnection Cause Values," on page C-33.
If the disconnection cause is "No Network Connection" or "Participant Hang
Up", then this field indicates the Q931 disconnect cause.
Event Fields for Event 2007 - PARTICIPANT DISCONNECTED CONTINUE 1
Description
The number of times that the general synchronization of the MCU was lost.
The number of times that the general synchronization of the participant was
lost.
The number of times that the synchronization of the MCU video unit was
lost.
The number of times that the synchronization of the participant video was
lost.
Not supported.
Always contains the value 0.
Appendix C-CDR Fields - Unformatted File
C-15