Content Sharing Parameters In Content Highest Common (Content Video Switching) Mode; Content Protocols - Polycom RealPresence 800s Administrator's Manual

Polycom® RealPresence Collaboration Server 800s Administrator's Guide
2
Content Sharing Parameters in Content Highest Common (Content Video
Switching) Mode
This section describes the possible content sharing parameters when content Highest
Common mode is used:
•
•
•
3-6
Table 3-2 H.239 Content Options (Continued)
Field
Content Protocol
Content Resolution
Send Content to
Legacy Endpoints
Click OK.
Content Settings
Content Protocol
Content Resolution
Description
•
H.263 (AVC CP Only)
•
Content is shared using the H.263 protocol.
•
Use this option when most of the endpoints support H.263 and
some endpoints support H.264.
•
H.263 & H.264 Auto Selection (AVC CP Only Default)
•
Content is shared using H.263 if a mix of H.263-supporting
and H.264-supporting endpoints are connected.
•
Content is shared using H.264 if all connected endpoints have
H.264 capability.
•
H.264 HD (AVC CP Only)
•
Ensures high quality Content when most endpoints support
H.264 and HD Resolutions.
•
H.264 Cascade and SVC Optimized
•
All Content is shared using the H.264 content protocol and is
optimized for use in SVC only and Cascaded Conferences.
For a detailed description of each of these settings, see "Content
Protocols" on page 3-8.
Select a Content Resolution from the drop-down menu.
The Content Resolutions that are available for selection are
dependent on the Line Rate and Content Settings that have been
selected for the conference.
For a full list of Content Resolutions see "Defining Content Sharing
Parameters for a Conference" on page 3-3.
Note: This field is only displayed when H.264 Cascade and SVC
Optimized option is selected as the Content Protocol and is enabled
for selection in CP conferences (AVC CP Only). This option is
disabled in SVC conferences.
This Content Sharing option is not supported with RealPresence
Collaboration Server 800s.
Polycom, Inc.