Participant Settings - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server 800s Administrator's Guide

Participant Settings

When defining a new participant or modifying an existing participant, select SIP as the
participant's networking environment Type in the New Participant or Participant Properties -
General tab.
The participants Video Protocol in the New Participant or Participant Properties - Advanced tab
should be left at (or set to) its default value: Auto.
The Auto setting allows the video protocol to be negotiated according to the endpoint's
capabilities:
•
•
Protocol Forcing
Selecting H.264, RTV, H.263 or H.261 as the Video Protocol results in endpoints that do not
support the selected Video Protocol connecting as Secondary (audio only).
4-12
OCS endpoints and Lync Server clients connect to the conference using the RTV
protocol.
Other endpoints negotiate the video protocol in the following sequence: H.264,
followed by RTV, followed by H.263 and finally H.261.
SIP
Polycom, Inc.