Polycom RealPresence 800s Administrator's Manual page 318

RealPresence Collaboration Server 800s Administrator's Guide
3
4
16-10
Modify the following fields:
Table 16-6 Default IP Network Service – IP
Field
Network Service
Name
IP Network Type
Signaling Host IP
Address
Media Card 1
IP Address
Subnet Mask
Click the Routers tab.
With the exception of IP Network Type, the field definitions of the Routers tab are the
same as for the Default Management Network. For more information see page 16-4.
Description
The name Default IP Service is assigned to the IP Network Service by
the Fast Configuration Wizard. This name can be changed.
Note: This field is displayed in all IP Signaling dialog boxes and can
contain character sets that use Unicode encoding.
Displays the network type selected during the First Entry
configuration. The Default IP Network icon indicates the selected
environment.
You can select:
•
H.323: For an H.323-only Network Service.
•
SIP: For a SIP-only Network Service.
•
H.323 & SIP: For an integrated IP Service. Both H.323 and SIP
participants can connect to the MCU using this service.
Note: This field is displayed in all Default IP Service tabs.
On RealPresence Collaboration Server 800s this field is disabled as
only one IP address is used for signaling and media transmission.
Enter the address to be used by IP endpoints when dialing in to the
MCU.
Enter the subnet mask of the MCU.
Default value: 255.255.255.0.
Polycom, Inc.