Polycom RealPresence 800s Administrator's Manual page 61

22 Define the following parameters:
23 Click OK to complete the Profile definition.
Polycom, Inc.
Selective registration is enabled by assigning a conference Profile in which registration
is configured to the required conferencing entities. Assigning a conference Profile in
which registration is not configure to conferencing entities will prevent them from
registering. By default, Registration is disabled in the Conference Profile, and must be
enabled in Profiles assigned to conferencing entities that require registration.
Table 2-19 New AVC Profile - Network Services Parameters
Parameter
IP Network Services:
Service Name
SIP Registration
Accept Calls
A new Profile is created and added to the Conference Profiles list.
Description
This column lists all the defined Network Services, one or several
depending on the system configuration.
To register the conferencing entity to which this profile is assigned
with the SIP Server of the selected Network Service, click the check
box of that Network Service in this column.
When SIP registration is not enabled in the conference profile, the
Collaboration Server's registering to SIP Servers will each register
with an URL derived from its own signaling address. This unique URL
replaces the non-unique URL, dummy_tester, used in previous
versions.
To prevent dial in participants from connecting to a conferencing
entity when connecting via a Network Service, clear the check box of
the Network Service from which calls cannot connect to the
conference.
Chapter 2-Conference Profiles
2-41