Polycom RealPresence 800s Administrator's Manual page 176

Polycom® RealPresence Collaboration Server 800s Administrator's Guide
3
8-8
Define the following fields:
Table 8-3 New Participant – General Properties
Field
Name
Endpoint Website
Dialing Direction
Type
IP Address
Description
Enter the name of the participant or the endpoint as it will be
displayed in the Collaboration Server Web Client.
The Name field can be modified using Unicode encoding.
•
English text uses ASCII encoding and can contain the most
characters (length varies according to the field).
•
European and Latin text length is approximately half the length of
the maximum.
•
Asian text length is approximately one third of the length of the
maximum.
Maximum field length in ASCII is 80 characters.
The maximum length of text fields varies according to the mixture of
character sets used (Unicode and ASCII).
This name can also become the endpoint name that is displayed in
the video layout. For more details about endpoint (site) names, see
the Polycom® RealPresence Collaboration Server 800s Getting
Started Guide, "Indications in the Video Layout" on page 3-32".
Note: This field is displayed in all tabs.
Click the Endpoint Website hyperlink to connect to the internal
website of the participant's endpoint. It enables you to perform
administrative, configuration and troubleshooting activities on the
endpoint.
The connection is available only if the IP address of the endpoint's
internal site is defined in the Website IP Address field.
Select the dialing direction:
•
Dial-in – The participant dials in to the conference. This field
applies to IP participants only.
•
Dial-out – The MCU dials out to the participant.
The network communication protocol used by the endpoint to connect
to the conference: H.323 or SIP.
The fields in the dialog box change according to the selected network
type.
Enter the IP address of the participant's endpoint.
•
For H.323 participant define either the endpoint IP address or
alias.
•
For SIP participant define either the endpoint IP address or the
SIP address.
For Collaboration Servers registered to a gatekeeper, the
Collaboration Server can be configured to dial and receive calls to
and from H.323 endpoints using the IP address in the event that the
Gatekeeper is not functioning.
Polycom, Inc.