Polycom RealPresence 800s Administrator's Manual page 437

9
10 Define the following parameters:
Polycom, Inc.
Click the Traps tab.
The Collaboration Server-SNMP Properties – Traps dialog box opens.
Traps are messages sent by the MCU to the SNMP Managers when events such as MCU
Startup or Shutdown occur. Traps may be sent to several SNMP Managers whose IP
addresses are specified in the Trap Destinations box.
Table 20-14 SNMPv3 - Traps
Field
SNMP Trap Version
Description
Specifies the version, either Version 1 2 or 3 of the traps being sent to
the IP Host. Polycom software supports the standard SNMP version 1
and 2 traps, which are taken from RFC 1215, convention for defining
traps for use with SNMP.
Note: The SNMP Trap Version parameters must be defined
identically in the external SNMP application.
Chapter 20-MCU Administration and Utilities
Version 3
Versions 1 & 2
20-23