Completing The System Configuration - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server 800s Administrator's Guide
8

Completing the System Configuration

To complete the system configuration:
9
10 Enter the activation key.
11 Define the IP Network Service for the media and signaling using the Fast Configuration
12 Optional: Restore the system configuration. For details, see "Software Management" on
13 Remove the USB memory stick from the RealPresence Collaboration Server.
H-10
The whole procedure may take 15 minutes. When the installation completes, the system
reboots.
When the system reboots the DVD is ejected.
Remove the DVD from the server and close the DVD drive.
Connect to the MCU using the default Polycom user name and Polycom password. For
details, see the RealPresence Collaboration Server 800s Getting Started Guide
Connection to MCU" on page
Wizard. For details, see the RealPresence Collaboration Server 800s Getting Started Guide
"Fast Configuration Wizard" on page 2-11.
page 20-41.
The system recovery is complete.
2-9
.
"Procedure 3:
,
,
Polycom, Inc.