Connecting To The Management Network - Polycom RealPresence 800s Administrator's Manual

Collaboration server

Hide thumbs Also See for RealPresence 800s:

Table of Contents

RealPresence Collaboration Server 800s - Administrator's Guide

Connecting to the Management Network

To connect directly to the Collaboration Server:

Connect one LAN cable between the PC and LAN 1 on the Collaboration Server's back

panel.Connect the power cable and power the Collaboration Server On.

Start the Collaboration Server Web Client application on the workstation, by entering the

factory setting Management IP address in the browser's address line and pressing Enter.

In the Collaboration Server Web Client Login screen, enter the default Username

(POLYCOM) and Password (POLYCOM) and click the Login button.

The Fast Configuration Wizard starts.

If no USB memory stick is detected and either: this is the First Time Power-up or the

Default IP Service has been deleted and the Collaboration Server has been reset, the

following dialog box is displayed:

For more information about First-time Power-up and the Fast Configuration Wizard see

the Polycom® RealPresence Collaboration Server 800s Getting Started Guide, "Procedure 1:

First-time Power-up" on page 2-8.

Enter the following parameters using the information supplied by your network

administrator:

— Control Unit IP Address

— Shelf Management IP Address

— Control Unit Subnet Mask

— Default Router IP Address

Click the Save & Close button.

Polycom, Inc.