Ethernet Settings - Polycom RealPresence 800s Administrator's Manual

Ethernet Settings

In the RealPresence Collaboration Server 800s, the automatically identified speed and
transmit/receive mode of each LAN port used by the system can be manually modified if
the specific switch requires it.
To modify the automatic LAN port configuration:
1
Polycom, Inc.
Table 16-16 IP Network Services Properties – ICE Servers (Continued)
Field
IP Address
Status 1/2/3/4
FW Detection
On the Collaboration Server menu, click Setup > Ethernet Settings.
The Ethernet Settings dialog box opens.
Description
The ICE Server's IP Address.
A status is displayed for each media card installed in the
Collaboration Server:
•
Connection O.K.
•
MS – register fail
•
MS – subscribe fail
•
MS – service fail
•
Connection failed
•
User/password failed
•
Channel didn't receive any packets for 5 seconds
•
Channel exceeded allotted bandwidth
•
Unknown failure
In systems with multiple media cards, Status 1 refers to the
uppermost media card.
The Firewall Detection status is displayed:
•
Unknown
•
UDP enabled
•
TCP enabled
•
Proxy -TCP is possible only through proxy
•
Block – both UDP & TCP blocked
•
None
Chapter 16-IP Network Services
16-23